Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


SSPC-PS Guide 22.00, Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems

All Standards | SSPC Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: November 01, 1982
Updated On: April 01, 2002
Editorial Change: November 1, 2004
 
This guide covers those shop primers used in today's modern commercial shipyards for preconstruction and prefabrication priming of abrasive blast cleaned structural steel and steel plates. To maximize efficiency in new construction, all ships' steel plates, shapes, and angles are abrasive blast cleaned, shop primed, and stored for future use in preparation of sections of ships, called modules or units. Shop primers are covered by generic classification.

COMMENT: Automatic abrasive blast cleaning and coating with preconstruction primer is common practice in shipbuilding today. The reason for the popularity of this practice is the reduction of costly hand abrasive blasting after unit or module construction. Some of the attributes of good preconstruction primers include: weldability with minimal effect on weld integrity; adequate corrosion protection for the steel prior to overcoating; compatibility with topcoats to be used; ability to be applied in thin films using automatic spray equipment; minimum health hazard when burning, cutting, and welding through the primer; drying to handle in 4 to 7 minutes to minimize damage from rollers and cranes.

(Back to all Standards)

 
   
 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2019, Technology Publishing Co., All rights reserved