Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


SSPC-Paint 25.1BCS, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel

All Standards | SSPC Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: May 01, 1997
Updated On: April 01, 2002
Editorial Change: November 1, 2004
 
This specification covers a French process zinc oxide, raw linseed oil, and alkyd primer suitable for use over blast cleaned steel.

This is an alkyd/linseed oil primer containing 30% more alkyd resin than SSPC Paint 25. It is not recommended for hand cleaned steel.

This primer is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, roller, or spray application over steel surfaces prepared in accordance with SSPC-SP 6/NACE No.3, Commercial Blast Cleaning, or SSPC-SP 11, Power Tool Cleaning to Bare Metal, or better. It is suitable as a shop primer, field primer, maintenance primer, or intermediate coat, and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. If the primed part of the structure is to be exposed to the weather, it should be topcoated as soon as practical.

(Back to all Standards)

 
   
 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2019, Technology Publishing Co., All rights reserved