Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

The D+D Guide to Paint defects

| More

Solve It! (3)

All content matching this tag

What causes bubbling or cratering of epoxy intermediate coat when applied over epoxy zinc-rich primer?

Question posted July 10 to July 16, 2016


On guardrails on a marine wharf, grating panels consisting of mild steel bars about 1/8-inch by 1-inch on a 2-inch-square grid were painted with a three-coat zinc/epoxy/urethane system. Inspectors are finding numerous pinholes in the finish coat along the inside corners of the grating where the 1-inch-thick bars meet at a 90-degree angle. These pinholes were not noticed in the zinc or epoxy coats, but the final coat's visual inspection is more detailed. What is the likely cause of the pinholing, and what could be done to prevent it on future applications? Also, what should the disposition of the parts with pinholes be, as in, repair, accept as is, reblast and recoat, or an alternative?

Question posted March 20 to March 26, 2016


For coatings with a high-solids content (95% or more), what kinds of defects, such as holidays or micropores, are possible or likely to occur in the applied film? How can these be prevented or remedied?

Question posted July 8 to July 14, 2013


   
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2019, Technology Publishing Co., All rights reserved