Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

The D+D Guide to Surface profile

| More

Daily Quiz (74)

All content matching this tag

True or false: According to a recent D+D In Depth article, sealers and thin-film floor coatings typically require a profile in the CSP 3-5 range.

Friday, December 16, 2016


What is another name for surface profile on steel?

Thursday, October 27, 2016


True or false: ASTM has a test method for measuring surface profile that is appropriate for profile produced by power tools.

Thursday, October 20, 2016


True or false: An entire session of the SSPC 2017 Conference in Tampa is devoted to surface profile.

Friday, October 14, 2016


True or false: Shotcreting produces a surface profile too rough for thin coatings.

Wednesday, October 12, 2016


True or false: ASTM offers only a visual method for determining the surface profile of concrete.

Thursday, September 29, 2016


True or false: ASTM D4417 describes three methods for measuring surface profile of blast-cleaned steel using either a digital profile gage or a surface profile comparator or a portable stylus instrument.

Thursday, September 8, 2016


What organization produces rubber replica templates to judge the degree of surface profile on concrete?

Wednesday, September 7, 2016


How is profile measured in ASTM D4417?

Thursday, August 18, 2016


What organization developed a standard for measuring concrete surface profile with replica putty?

Friday, July 15, 2016


True or false: There is no quantifiable test method for determining the surface profile on concrete substrates.

Friday, June 24, 2016


True or false: Rubber replica templates from the American Concrete Institute can be used to judge the degree of surface profile on concrete.

Wednesday, April 20, 2016


True or false: There is a quantifiable method for determining the surface profile on concrete substrates.

Wednesday, February 10, 2016


What organization issued a standard in 2012 for measuring the profile of concrete after surface preparation?

Wednesday, December 16, 2015


Replica tape increases in transparency where it is compressed. What feature of surface profile does this reveal?

Tuesday, November 10, 2015


True or false: The number of peaks in a steel surface profile after blast cleaning has an effect on coating performance.

Wednesday, October 28, 2015


Surface profile on steel, measured as peak to valley height of the roughness, has several other names, including which of the following?

Tuesday, October 6, 2015


True or false: SSPC has a standard describing test methods for measuring surface profile.

Friday, May 15, 2015


Surface profile on blast-cleaned steel, measured as peak-to-valley height of the surface roughness, has several other names, including which of the following?

Wednesday, February 18, 2015


True or false: In addition to SSPC-PA 17, there are two ASTM standards on measuring surface profile of blast-cleaned steel.

Monday, February 2, 2015


True or false: Surface profile on steel can be measured in the field.

Wednesday, October 15, 2014


True or false: There are no quantitative methods for measuring the surface profile of concrete.

Wednesday, October 15, 2014


True or false: The number of peaks in the surface profile of a steel substrate has no measurable effect on the performance of coatings applied over it.

Thursday, September 4, 2014


True or false: SSPC publishes a surface preparation standard for power tool cleaning that requires establishment of a profile on steel.

Tuesday, August 5, 2014


True or false: Abrasive particle size, shape, and hardness all have an impact on the creation of surface profile.

Tuesday, July 8, 2014


What organization developed a standard for measuring concrete surface profile with replica putty?

Tuesday, June 24, 2014


True or false: Scabbling produces a rougher profile on concrete than does air-abrasive blasting with sand.

Friday, May 30, 2014


True or false: Research by Roper, Weaver, and Brandon has shown that the peak count of surface profile after blast cleaning has no bearing on coating performance.

Wednesday, May 14, 2014


True or false: There is a quantitative test method for measuring surface profile of concrete.

Thursday, April 10, 2014


What instrument or device is used to determine steel profile roughness/peak count requirements as required in SSPC-SP 17 and described in ASTM D4417?

Monday, December 23, 2013


When replica putty is used to determine the surface profile of concrete according to ASTM D7682, Method A (visual comparison), what is the replica putty compared to in order to assess the profile depth?

Monday, December 16, 2013


True or False: SSPC-SP 11, Power Tool Cleaning to Bare Metal, has no requirement for surface profile.

Friday, December 6, 2013


Press-O-Film is the name of what type of product?

Friday, November 22, 2013


True or False: Silica sand and coal slag abrasive with the same particle size distribution will produce different profile depth ranges on blast-cleaned steel.

Friday, November 15, 2013


Which of the following methods for measuring surface profile is not described in ASTM D4417, “Standard Test Method for Field Measurement of Surface Profile of Blast Cleaned Steel”?

Tuesday, November 5, 2013


What is another name for the portable stylus instrument used to measure surface roughness of blast-cleaned steel?

Wednesday, October 30, 2013


What quality control device has the names Keane and Tator connected to it?

Monday, October 28, 2013


What organization has developed a method for measuring and replicating concrete surface profile using replica putty?

Friday, October 11, 2013


What organization created and sells rubber replica templates for determining the surface profile of concrete?

Friday, October 11, 2013


What is the typical range for the peak-to-valley height of surface profile created on steel by power-tool cleaning to bare metal or abrasive-blast cleaning?

Thursday, September 5, 2013


True or false: The number of peaks in a steel surface profile created by abrasive blast cleaning has no effect on coating performance.

Monday, August 12, 2013


What degree of surface profile is required on concrete to be treated with a siloxane sealer?

Thursday, July 18, 2013


ICRI recommends how much profile in its surface preparation requirements for polymer overlays on concrete?

Friday, June 28, 2013


What is another term for surface profile on steel?

Tuesday, May 28, 2013


True or false: The number of surface profile peaks in abrasive-blast-cleaned steel has no effect on coating performance.

Thursday, February 14, 2013


True or false: An SSPC standard was recently published to provide a standard set of acceptance criteria to determine compliance with surface profile requirements in project specifications.

Monday, February 4, 2013


True or false: Rubber replica templates from the American Concrete Institute can be used to judge the degree of surface profile on concrete.

Monday, January 21, 2013


True or false: A research study by Roper, Weaver, and Brandon indicated that the number of peaks in a steel surface profile created by abrasive blasting has no effect on performance of coatings applied to the steel.

Thursday, December 20, 2012


What is the minimum surface profile required to meet SSPC’s specification, Power Tool Cleaning to Bare Metal?

Tuesday, November 20, 2012


What organization provides visual profile standards for concrete?

Friday, October 12, 2012


True or False: SSPC’s recent revisions to SSPC-SP 11 and SSPC-SP 15 changed the standards’ requirements for surface cleanliness and minimum surface profile.

Friday, September 14, 2012


What organization recently issued a standard for measuring the profile of concrete after surface preparation?

Tuesday, July 31, 2012


True or false: There is no quantifiable method for determining the surface profile on concrete substrates.

Friday, June 8, 2012


Among the options below, which is the most important in achieving the specified surface profile on steel when you are air abrasive blast cleaning?

Tuesday, April 10, 2012


How can sponge blasting produce a profile on steel?

Friday, February 17, 2012


What happens to the existing profile on steel when UHP water blasting is used to remove rust and/or coatings?

Tuesday, February 14, 2012


Which of the following is most likely to be the result of excessive profile depth on steel after blast cleaning?

Tuesday, October 18, 2011


If you need to answer a question about the surface profile requirements for blasted surfaces on a job, what document would you consult?

Friday, October 7, 2011


How does a dry film thickness measurement of a coating on steel take into account the blast profile on the steel?

Tuesday, August 30, 2011


True or false: The size of the steel shot used to shot-blast a concrete floor has no effect on the depth of the surface profile.

Tuesday, August 16, 2011


What US organization produces concrete surface profile chips to assess the level of profile achieved by surface preparation of concrete?

Tuesday, August 16, 2011


True or false: In abrasive blasting, the harder the abrasive, the deeper the profile it is likely to generate.

Tuesday, August 2, 2011


What would be the most likely result of excessive profile on a steel substrate after abrasive blasting?

Friday, July 22, 2011


What is most likely to help you achieve the specified profile on the steel you are blast cleaning?

Thursday, June 16, 2011


True or false: A research study by Roper, Weaver and Brandon indicated that the number of peaks in a steel surface profile created by abrasive blast cleaning affects coating performance.

Wednesday, June 1, 2011


Which of the following is not used for measuring the surface profile of cleaned steel?

Friday, May 13, 2011


Which of the following surface preparation methods for concrete produces the largest surface profile?

Monday, May 9, 2011


ICRI recommends how much surface profile in its surface preparation requirements for polymer overlays on concrete?

Monday, May 9, 2011


Surface profile on steel, measured as peak-to-valley height of the roughness, has several other names, including which of the following.

Monday, April 18, 2011


Which of the following can cause excessive surface profile?

Monday, February 14, 2011


Which of the following terms is out of place in the list?

Tuesday, February 8, 2011


True or false: In surface preparation operations, hackles are most likely to be formed on steel substrates when the blast abrasive is steel shot.

Friday, January 7, 2011


What organization has surface profile coupons that replicate the degrees of surface profile achieved by surface preparation on concrete floors?

Tuesday, November 23, 2010


Which of the following parameters affects the depth of the surface profile when steel is cleaned by abrasive blasting?

Wednesday, September 22, 2010


   
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2019, Technology Publishing Co., All rights reserved